bora X Pure - Filter Status and After-Run Function Settings

User menu
EN
124 bora.com
Fig.6.2
Menu item 2: Child lock
Permanently deactivating the child lock
u Tap the bottom slider segment .
u Move to another menu item or close the menu.
T The child lock is permanently deactivated.
6.3 Menu item 3: Show filter
status and reset filter
service display
If menu item 3 is called up, the filter status will
be automatically shown (only in recirculation
mode).
Resetting the filter service display
u Long press on the fan button .
T All slider elements are once again displayed at 100%
brightness.
T The filter service indicator is no longer displayed
when the cooktop extractor is switched on.
u Move to another menu item or close the menu.
Fig.6.3
Menu item 3: Filter status
6.4 Menu item 4: Duration of
the automatic after-run
function
The duration of the automatic after-run function
can be set using menu item 4.
There are three times to choose from:
T 20 minutes
T 15minutes
T 10 minutes
The current duration is displayed for 2 seconds.
Selecting the duration of the automatic
after-run function
u Tap the corresponding slider segment .
u Move to another menu item or close the menu.
Fig.6.4
Menu item 4: Duration of the automatic after-
run function