Functions and operation
EN
114 bora.com
Fig.5.1
Standard display after switching on
When the child lock is active, the lock button
lights up after system start . The standard
display will only appear once it has been
unlocked (Child lock).
5.4.2
Switching off
u
Long press on the power button .
T
The switching-off animation is displayed.
If the cooktop extractor has been on:
T
The fan symbol will light up and the automatic after-
run function will start (the automatic after-run
animation is displayed).
T
The display goes out when the after-run time has
lapsed.
If the cooktop has been on:
T
The residual heat indicator is displayed for
previously active and still hot cooking
zones.
T
The display goes out when no more residual heat is
present.
5.4.3
Short-time timer (egg timer)
The short-time timer emits both a visual and an acoustic
signal after a time set by the user and provides the
function of a conventional egg timer.
Activating the short-time timer
u
Tap the short-time timer button .
T
The time flashes in the multi-function display above
the slider in minutes ( ).
T
The cooking zones in the display are dimmed.
Setting the time
u
Set the desired time:
Command Increase time Decrease time
Swipe
upwards downwards
Tap
(exact to the
minute)
(exact to the
minute)
Tab.5.3
Setting the time
T
The short-time timer button begins to flash.
Starting the short-time timer
u
Tap the flashing short-time timer button .
T
The set time starts to count down.
T
The remaining time is shown in the multi-function
display.
T
The short-time timer button is shown.
Time lapsed
T
10 seconds before the set time lapses, the system
flashes the remaining time.
T
In the last 5 seconds of the countdown an acoustic
signal can be heard every second.
T
The time indicator changes to the fan power
level.
Deactivating the short-time timer early
u
Long press on the short-time timer button .
T
The short-time timer is stopped.
T
The operating panel display changes to the standard
display.
If the appliance is switched off, the short-time
timer will remain active.
5.4.4
Operating lock
The control lock prevents the current settings from
being changed accidentally or without permission.
T
If the control lock is active, the symbol lights up
T
The functions are locked and the indicators on the
display are dimmed (exception: On/Off touch
button).
Activating the control lock
u
Long press on the lock button .
T
The operating panel display is dimmed.
To Next Page
Loading...
Need help?
General
