Appliance description
EN
112 bora.com
The heating and heat-through times for the
cookware base, as well as the cooking results,
are significantly influenced by the structure and
material of the cookware.
Noises
The following noises may occur in the cookware when
using induction cooking zones, depending on the
material and the finish of the base:
T
Humming may occur when using a high power level.
This decreases or disappears when the power level is
decreased.
T
Crackling or whistling may occur due to cookware
bases being made of different materials (e.g.
sandwich base).
T
Clicking sounds may occur during electronic
switching procedures, especially at low power levels.
T
Whirring may occur when the cooling fan is switched
on. In order to increase the service life of the
electronic system, the cooktop is equipped with a
cooling fan. The cooling fan switches on
automatically if the cooktop is used intensively. You
will hear a whirring sound. The cooling fan may
continue to run after the appliance has been
switched off.
To Next Page
Loading...
Need help?
General
