General Guidelines for Serializing
Use the following guidelines for serializing:
• Both lowercase and uppercase characters can be serialized.
• Serialized characters can be incremented only (cannot decrement).
• You can choose only one serial type per label (standard or octal).
• Serialized text is limited to one line and one sequence per label.
• The printer first serializes the character the cursor is highlighted on when the <Func>
+ <Serial> keys are pressed. When this character reaches its maximum value (9, z, or Z
if standard, 7 if octal), the character immediately to the left is incremented, and the right
most character cycles back to its minimum value (0, a, or A if standard, 0 if octal).
• Once a serialized character has reached its maximum value and the next character
encountered to the left is a non-serializable character (such as a space, accented character,
or symbol), the serial pattern cycles back to begin incrementing again from the rightmost
serialized character.
• After printing a series of serial characters, the editor displays the next logical character in
the serial pattern (example: Print 1 to 5. After print job is completed, editor displays 6).
26 TLS2200
™
Thermal Transfer Printer User Manual
To Next Page
Loading...
Need help?
General
