Maintenance
Keep the TLS2200
™
printer in good operating condition by performing the following
recommended maintenance procedures.
Cleaning the Drive Roller and Cutter
Follow the instructions on the cleaning card shipped with the unit.
Cleaning the Print Head
Remove the cutter mechanism by loosening the screw that holds it in place. Lift the cutter
away from the top of the printer mechanism and clean the print head with a cotton swab dipped
in isopropyl alcohol. Replace the cutter mechanism.
Accessory Parts List
The following parts and accessories can be ordered from your BRADY Worldwide, Inc.
supplier:
Description Stock No. NAED No.
AC Adapter TLS2200 AC 18555
™
Battery Charger TLS2200 BC 18551
™
Battery Pack TLS2200 BP 18554
™
Cleaning Kit PCK-5 18556
Communications Cable TLS2200 CABLE 18574
™
Cutter Assembly TLS2200 C 33897
™
Dust Cover TLS2200 DC 18553
™
Hard Side Carrying Case TLS2200 HC 18552
™
R4310 Black Ribbon R4310 18558
R6010 Black Ribbon R6010 18559
R6210 Black Ribbon R6210 18560
R4410 Red Ribbon R4410R 18704
R4410 White Ribbon R4410W 18705
R4410 Blue Ribbon R4410B 18706
Soft Side User’s Case TLS2200 SC 18562
™
User’s Guide TLS2200 UM 18557
™
62 TLS2200
™
Thermal Transfer Printer User Manual
To Next Page
Loading...
Need help?
General
