T16: Creating a Legend List, Recalling and Editing a Legend
Note: This example assumes you have marker roll PTL-19-423 loaded in your printer.
Labels to be printed:
100A
100B
Setup Status:
Center
H Justify
Center
V Justify
0 Degrees
Rotation
Component
Format
Text
Legend Type
1. Press <List>.
2. Press the <
▼> key once to select Create, then press <Enter>.
3. When “Enter List Name” prompt appears, enter LIST5, then press <Enter>.
4. When “Enter Part No.” prompt appears, enter PTL-19-423, then press <Enter>.
5. Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the default
value of 9.
6. Enter 100A on line one.
7. Press <Func> + <Save>.
8. Press <Shift> + <Legend Clear>.
9. Enter 100B on line one.
10. Press <Func> + <Save>.
11. Turn the battery power switch off to deactivate List5.
58 TLS2200
™
Thermal Transfer Printer User Manual
To Next Page
Loading...
Need help?
General
