Brady TLS2200 - Page 66

11. Press the <▲> or <▼> keys to toggle the human readable text ON, then press <Enter>.
12. Press the <▲> or <▼> keys as needed to set the font size to 6, then press <Enter>.
13. Press <Func> + <Exit> to exit back to the Text Editor screen.
14. With the cursor highlighted on line one, press <Shift> + <
▲> two times to increase the
font size from 9 to 11.
15. Enter BRADY on line one, then press <Enter>.
16. Press the <Barcode> key to toggle the Legend Type for line two from Text to Barcode
mode (B is displayed on the Status Bar).
17. Enter A101 on line two.
18. Press <Func> + <Save>.
19. Press <Legend Clear> to clear text from line 2 only.
20. Enter B101 on line two.
21. Press <Func> + <Save>.
22. Turn the battery power switch off to deactivate List4.
To select (recall) List4 as the active list:
1. Turn the battery power switch on.
2. Press <List>.
3. With the cursor on Select, press <Enter>.
4. Use the <
▲> and <▼> arrows to select List4, then press <Enter>. The part number
appears, followed by the Text Editor screen. List4 is now the active list.
5. Press <List>.
6. Press the <
▼> key twice to select Print, then press <Enter>.
7. When the “No. of Copies?” prompt appears, enter 1, then press <Enter>.
TLS2200
™
Thermal Transfer Printer User Manual 57