Brady TLS2200 User Manual

T17: Creating a Legend List, Banner Legends
Note: This example assumes you have the banner marker roll PTL-42-439OR loaded
in your printer.
Setup Status:
H Justify
Center
V Justify
Center
Rotation
0 Degrees
Format
Component
Legend Type
Text
1. Press <List>.
2. Press the <
▼> key once to select Create, then press <Enter>.
3. When “Enter List Name” prompt appears, enter LIST6, then press <Enter>.
4. When “Enter Part No.” prompt appears, enter PTL-42-439, then press
<Enter>.
5. Press <Shift> + <Form Clear> to delete all lines of text and reset the font
to the default value of 18.
6. Press <Func> + <Setup> to access the Setup Menu.
7. Press the <▼> key six times to select Units, then press <Enter>.
8. Press the <
▲> or <▼> keys to toggle the Units to Metric, then press
<Enter>.
9. Press the <
▲> key four times to select Continuous, then press <Enter>.
10. With the cursor highlighted on Banner, press <Enter>.
11. Press <Func> + <Exit> to exit back to the Text Editor screen.
12. Enter 120 VOLTS on line one.
13. Press <Func> + <Save>.
14. Press <Shift> + <Legend Clear>.
15. Enter CAUTION on line one.
16. Press <Func> + <Save>.
17. Press <Shift> + <Legend Clear>.
60 TLS2200
™
Thermal Transfer Printer User Manual
120 VOLTS CAUTION COMMUNICATIONS CLOSET

Brady TLS2200 Specifications

General

Brand	Brady
Model	TLS2200
Category	Printer
Language	English