Brady TLS2200 User Manual

To select (recall) List5 as the active list:
1. Turn the battery power switch on.
2. Press <List>.
3. With the cursor on Select, press <Enter>.
4. Use the <▲> and <▼> arrows to select List5, then press <Enter>. The part number
appears, followed by the Text Editor screen.
To add a legend to List5:
1. Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the
default value of 9.
2. Enter 100C on line one.
3. Press <Func> + <Save>. The legend is added (or appended) to the end of List5.
To recall and edit a legend already saved in List5:
1. Press <Func> + <Recall> twice to recall the second legend to the Text Editor
screen. Legend 100B displays on the Text Editor screen.
2. Press <Shift> + <
▲> four times to set the font size to 13.
3. Press <Func> + <Save>.
4. When the prompt appears “Save as New” or “Save as Current”, press the <
▼> key
once to select “Save as Current”.
5. Press <Enter>. Legend 100B is edited to a larger font size.
To delete a legend already saved in List5.
1. Press <Func> + <Recall>. Legend 100C displays on the Test Editor screen.
2. Press <Func> + <Shift> + <Delete>. Legend 100C is now deleted from List5.
3. Press <List>.
4. Press the <
▼> key twice to select Print, then press <Enter>.
5. When the “No. of Copies?” prompt appears, enter 1, then press <Enter>.
TLS2200
™
Thermal Transfer Printer User Manual 59

Brady TLS2200 Specifications

General

Brand	Brady
Model	TLS2200
Category	Printer
Language	English