Brady TLS2200 - T15: Creating and Recalling a Legend List, Barcode Labels

T15: Creating and Recalling a Legend List, Barcode Labels
Note: This example assumes you have marker roll PTL-19-423 loaded in your printer.
Labels to be printed:
BRADY
A101
A101
BRADY
A101
B101
Setup Status:
Center
H Justify
Center
V Justify
0 Degrees
Rotation
Component
Format
Text
Legend Type
1. Press <List>.
2. Press the <
▼> key once to select Create, then press <Enter>.
3. When “Enter List Name” prompt appears, enter LIST4, then press <Enter>.
4. When “Enter Part No.” prompt appears, enter PTL-19-423, then press <Enter>.
5. Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the default
value of 9.
6. Press <Func> + <Setup> to access the Setup Menu.
7. Press the <
▼> key once to select Barcode, then press <Enter>.
8. With the cursor highlighted on Bar Height, press <Enter>.
9. Use the <
▲> and <▼> keys as needed to set the height of your barcode to 8mm (0.31496
in.), then press <Enter>.
10. Press the <
▼> key once to select Human Readable, then press <Enter>.
56 TLS2200
™
Thermal Transfer Printer User Manual