11. Press <Shift> + <Wire> to change format mode from Component to Wire
(note the change from C to W on the LCD Status Bar).
12. Enter A1000 on line one.
13. Press <Func> + <Save>.
14. Press <Shift> + <Legend Clear>.
15. Enter A2050 on line one.
16. Press <Func> + <Save>.
17. Press <Shift> + <Legend Clear>.
18. Enter A2067 on line one.
19. Press <Func> + <Save>.
20. Press <List>.
21. Press the <
▼> key twice to select Print, then press <Enter>.
22. When the “No. of Copies?” prompt appears, enter 2, then press <Enter>.
TLS2200
™
Thermal Transfer Printer User Manual 55
To Next Page
Loading...
Need help?
General
