Appendix 2: Glossary of Terms
It may be helpful to review these terms while using this guide:
Active Legend List—A list becomes active when you create or select it. See Creating a New
List and Selecting a List in the Tutorial Guide section. A list that has been activated is ready to
be printed or edited.
Device Loader—A software program that enables a personal computer to communicate with
hard drive, CD-ROM drives, printers, and other peripherals. Device loaders are stored on a
hard disk and are loaded into memory at boot up.
Firmware—Software that is embedded in a hardware device. It is often provided on flash
ROMs or as a binary image file that can be uploaded onto existing hardware by a user.
Label—Once a marker contains printed text, it is referred to as a label.
Legend—The actual text to be printed on a marker. The legend appears on the LCD screen
and can be stored in memory.
Legend List—One or more legends stored under a list name.
Marker—A blank label. Until a label is actually printed, the material is referred to as a
marker. Markers are available in a variety of sizes.
Marker Roll—A marker roll contains the marker and a notched liner that are fed through the
printer, and a smart cell located in the spindle. The TLS2200
™
printer uses the smart cell to
automatically identify the marker being used.
Recalled Legend—A legend is recalled when you press <Func> + <Recall> or <Func>
+ <Shift> + <Recall> from within an active legend list.
Serialize—To automatically print labels in a numeric or alphabetical sequence.
TLS2200
™
Thermal Transfer Printer User Manual 69
To Next Page
Loading...
