When in Edit mode, the Print, Feed, and Peel commands are disabled. Turn the Edit mode off
to restore these functions.
The Edit mode toggles to Off when the printer is turned off.
Appending a List
To append a list means to add legends to a previously saved list. All legends are appended to
the end of the list. You cannot save legends to the beginning or middle of a list.
1. If you do not have a list active, select a list. Refer to Selecting a List earlier in this section
for instructions.
2. Create a legend following the normal guidelines for non-list legends.
3. Press <Func> + <Save>.
4. When the prompt appears “Save as New” or “Save as Current”, select “Save as New”.
Your legend is now added to the end of the list.
Deleting a List
To delete a list from memory, follow the instructions below:
1. Press <List> to activate the List Menu.
2. Press the <▼> key four times to select Delete, then press <Enter>. You will be
prompted with all list names stored in the printer (up to 10).
3. Use the <
▲> and <▼> keys to select the name of the list you want to delete, then press
<Enter>. After deleting a list, the display returns to the Text Editor screen.
32 TLS2200
™
Thermal Transfer Printer User Manual
To Next Page
Loading...
Need help?
General
