Pressing <Shift> + <Legend Clear> deletes all text in the legend from the Text
Editor screen. Press <Legend Clear> to delete text from only one line (the line
currently displayed).
Once a legend is saved to a list, pressing <Legend Clear> or <Shift> + <Legend Clear>
only deletes text from the screen, not from the list. Refer to Editing a List for instructions on
deleting legends from a list.
9. Enter text for a second legend.
10. Press <Func> + <Save> to save the second legend to the list.
Continue this process of creating and saving until all legends are entered into your list.
11. To exit the current list, turn the power off.
To exit (deactivate) a list, you can create a new list, select a list, or turn the power off.
Selecting a List
Selecting a List will make it active for printing and editing. To select a list, follow the
instructions below:
1. Press <List> to activate the List Menu.
2. The cursor is on Select. Press <Enter>. You will be prompted with all list names stored
in the printer (up to 10). The last activated list will display on the Text Editor screen.
3. Use the <
▲> and <▼> keys to select the name of the list you want to activate, then press
<Enter>. The part number you originally entered briefly displays, followed by the Text
Editor screen.
Your list is now activated for printing or editing.
Printing a List
To print a list, follow the instructions below:
1. If you do not have a list active, create or select a list. Refer to Create a New List and
Selecting a List earlier in this section for instructions.
2. Press <List> to access the List Menu.
You must go through the List Menu in order to print a list. Simply pressing <Print> will print
only the legend shown in the Text Editor screen.
3. Press the <
▼> key twice to select Print, then press <Enter>. If no list is active, “Invalid
Function” is displayed on the Text Editor screen.
4. If a list is activated and you have recalled a legend, you are prompted to choose “Entire
List” or “From Current”. Select “From Current” if you want to print only the part of the
list from the legend currently displayed forward. If you run out of ribbon or markers
during a list print, press <Enter> to return to the legend where the printer stopped.
TLS2200
™
Thermal Transfer Printer User Manual 29
To Next Page
Loading...
Need help?
General
