Brady TLS2200 - Page 76

Error Message Cause Corrective Action
If you receive this
message while trying to
select a list, and Edit
mode is off, either:
•there is no part loaded
in the printer.
-or-
•you have the wrong part
loaded in the printer.
The wrong part is a part
other than the one the list
was created for.
Load the correct part in the printer. The
correct part is the part that the list was
created for.
Wrong Part! Use
PTL-XX-XXX
If you receive this
message while trying to
save a legend to an active
list, either:
Load the correct part in the printer. The
correct part is the part that the list was
created for.
•there is no part loaded
in the printer.
-or-
•you have the wrong part
loaded in the printer.
The wrong part is a part
other than the one the list
was created for.
TLS2200
™
Thermal Transfer Printer User Manual 67