Branson 2000X Series User Manual

vi 100-214-276 Rev. 3
U
Unpack the Power Supply - - - - - - - - - - - - - - - - - - - - 4-3
Unpack the Stand or Actuator - - - - - - - - - - - - - - - - - - 4-3
Unpacking Actuator Assemblies - - - - - - - - - - - - - - - - - 3-3
Upper Limit Switch - - - - - - - - - - - - - - - - - - - - - - - - 5-3
User I/O Cable Pin Assignments - - - - - - - - - - - - - - - - 4-27
User I/O DIP Switch (SW1) - - - - - - - - - - - - - - - - - - - 4-30
User I/O Input and Output Function Selection - - - - - - - - - - 4-29
User I/O Interface - - - - - - - - - - - - - - - - - - - - - - - 4-26
V
Vibration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1
W
Warranty- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-7
Welding Systems- - - - - - - - - - - - - - - - - - - - - - - - - 2-7
Booster - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-8
Converter- - - - - - - - - - - - - - - - - - - - - - - - - - - 2-7
Encoder - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-8
Horn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-8
Load Cell and Dynamic Follow Through - - - - - - - - - - - - 2-8
Power Supply- - - - - - - - - - - - - - - - - - - - - - - - - 2-7
Ultrasonics Plastics Welding - - - - - - - - - - - - - - - - - 2-7
DOC EXPIRES 12PM 7/24/2012. Article or Material must comply with the requirements
stipulated by RoHS in its current version

Branson 2000X Series Specifications

General

Frequency	20 kHz
Overload Protection	Yes
Frequency Range	19.5 kHz to 20.5 kHz
Voltage	50/60 Hz
Operating Temperature	0 - 40° C