5 | Operating the machine Brielmaier Motormäher GmbH
62 BA Motor mower S250 (Version 2021/09)
5.8.1 Driving the machine
Preparation
a) Press dead man's lever and keep it pressed.
ð The "Dead man's lever status" lamp goes out.
ð Machine and attachment are ready for operation.
Driving the machine
Process as follows to drive the machine:
a) Optionally, pull the clutch/brake lever up to the stop.
NOTE
The speed levels can also be shifted without pulling the clutch.
b) Use the "Speed level +" button (1) to switch to speed level "1".
c) Leave the steering twist handle in the middle position.
d) To start up the machine, allow the clutch/brake lever to slowly return to
its original position.
ð When the attachment drive is switched on, the attachment starts before
the machine starts moving.
ð The machine moves straight ahead.
5.8.2 Steering
To steer left:
a) Turn the steering twist handle to the left.
To steer right:
a) Turn the steering twist handle to the right.
To Next Page
Loading...