brielmaier S250 - Finely Adjusting the Speed; Attachments

Brielmaier Motormäher GmbH Operation with radio remote control (optional) | 6
BA Motor mower S250 (Version 2021/09) 75
6.6.3.6 Steering
1
a) Move the control lever (1) to the left or right.
ð The basic unit steers in the corresponding direction.
6.6.3.7 Zero turn
1
a) Move the control lever (1) to the left or right as far as it will go.
ð The basic unit turns on the spot (zero turn).
6.6.4 Finely adjusting the speed
The driving speed can be adjusted within each speed level.
Prerequisite
Before finely adjusting the driving speed, make sure that:
– a speed level is engaged, e.g. "1".
Adjusting the driving speed
To adjust the driving speed:
1
2
a) Press and hold the "speed level -/G-" (1) button.
ð The basic unit slows down.
b) Press and hold the "speed level +/G+" (2) button.
ð The basic unit accelerates.
6.6.5 Attachments
A
B
C
1
The "Attachment" switch (1) has the following three positions:
– Forwards(A): Quick start/mowing unit: Attachment starts immediately,
oil pressure approx. 180 bar.
– Middle position (B): Attachment off.
– Backwards (C): Soft start/mulcher: Attachment starts slowly, oil pressure
approx. 260 bar.
2
If available: The current engine mode of the attachment is indicated on the
display (2).
NOTE
Pressure limit and a soft start is only possible if a "PCV" is fitted to the
basic unit (see chapter Options [}12]).