7 | Maintenance Brielmaier Motormäher GmbH
80 BA Motor mower S250 (Version 2021/09)
7.4 Spare parts
WARNING
Risk of injury from use of the wrong spare parts!
Using spare parts that are not approved by the manufacturer can result
in damage to the machine.
The use of spare parts that are not approved by the manufacturer voids
the warranty.
4 Only use original spare parts from the manufacturer.
4 Contact the specialist dealer if anything is unclear.
Ordering spare parts
Obtain spare parts from specialist dealers.
7.5 Maintenance work
7.5.1 Tyres
– Check the air pressure.
– Make sure that the air pressure on the right and left is identical.
– Check that the screws are tight. If necessary, retighten the screws.
– For spiked rollers, tighten the frame screw connection after 10
operating hours.
– Check spikes for breakage/damage.
7.5.2 Clean the hydraulic oil cooler
NOTICE
Damage due to overheating!
Contaminants can lead to overheating, which can result in damage.
4 Make sure that the hydraulic oil cooler and fan are always clean.
NOTE
If the hydraulic oil temperature is too high, the drive system and the
attachment switch off automatically.
To clean the hydraulic oil cooler:
– Check the intake area of the hydraulic oil cooler for contamination.
To Next Page
Loading...