brielmaier S250 - Maintenance Plan

Brielmaier Motormäher GmbH Maintenance | 7
BA Motor mower S250 (Version 2021/09) 79
7.3 Maintenance plan
Work to be done
Interval
After the
first 10
hours
Daily and
on demand
every 100
hours,
annually
every 250
hours,
every 2
years
Engine
Check/clean the air filter X
Clean the intake manifold grille (cooling air) X
Check/add engine oil X X
Check fuel for contamination/condensation X X
Replace the air filter including foam filter X
Replace the engine oil and engine oil filter (10W40
mineral oil)
X
Remove the baffle plates and clean the cooling fins X
Replace the fuel filter X
Check valve clearance (not applicable) Hydraulic tappets
Replace the spark plugs X
Check all functions and condition X X
Check the claw coupling spider for wear X
V-belt tension and wear check X
Hydraulic system
Clean the oil cooler and radiator grille X X
Hydraulic oil level control/supplement X X
Replace the hydraulic oil (Panolin HLP SYNTH 46) Do not mix X
Replace the hydraulic oil filter X
Check the hydraulic system for leaks X X X
Check that the hydraulic fittings are securely attached X X X
Check all functions and condition X X
Basic unit
Check tyre pressure X X
Tighten the frame screw connection (spiked rollers) X
Check the battery voltage, charging current and
voltage
X
Check the function of the battery disconnection unit X
Check that all screw connections are secure X X
Check the chassis for cracks and warpage X
Check the connectors, harnesses and pull cables X
Lubricate all lubrication points X X
Check all functions and condition X X