Brocade MLX Series and NetIron XMR Hardware Installation Guide 183
53-1003821-01
Installing a NetIron XMR 32000 router
3
2. Route cables from slots #13 and #14 up through comb A. Refer to Figure 124.
3. Route cables from slots #11 and #12 up through comb B.
4. Route cables from slots #9 and #10 up through comb C.
Cable routing for the lower-left quadrant
1. Route cables from slots #18 and #17 directly to the left through the side comb. Refer to
Figure 125.
FIGURE 125 Routing lower-left quadrant cables
1 Upper right quadrant 3 Comb B (slot #11 and #12 cables)
2 Comb C (slot #9 and #10 cables) 4 Comb A (slot #13 and #14 cables)
To Next Page
Loading...
