Brother DCP-8065DN

Confidential
5-61
5.1.43 Document Cover Sensor
(1) Disconnect the Connector from the Document cover sensor.
(2) Pull the Document cover sensor downwards to remove it from the Document cover LGL
ALFB while pressing the Hook of the Document cover sensor.
Fig. 5-75
5.1.44 Eject Roller B4
(1) Remove the four Eject rollers B4 and two Pressure roller shaft S from the Document cover
LGL ALFB.
Fig. 5-76

Assembling Notes
When assembling the Eject rollers B4, ensure that the direction of each roller is
correct as shown in the figure above.
Connecto
r
Document cover senso
r
Document cover LGL ALFB
Hoo
k
Pressure roller shaft S
Pressure roller shaft S
Eject rollers B4
Document cover LGL ALFB
Document cover senso
r
Hoo
k
Hoo
k
<Front side>
<Back side>
Boss
1
2
2
22
Eject rollers B4