Brother DCP-8065DN

[00318407] 040000 INF: Win2K
[00318417] 040000 INF: ----- Printer Driver Check Start -----
[00318417] 040000 INF: PARAM MODEL NAME MFC-5840CN *19 Installation Check Detail
[00318417] 040000 INF: PARAM CMP PRINTER NAME Brother MFC-5840CN Printe
r
*20 Printer Driver Installation Check
[00318417] 040000 INF: PARAM INTERFACE LAN
[00318417] 040000 INF: PARAM PRINTER ID
[00318417] 040000 INF: PARAM MODE 0
[00318427] 040000 INF: EXIST DRIVER NAME = Brother MFC-5840CN Printer *21 If there is EXIST DRIVER NAME, printer driver is properly installed.
[00318427] 040000 INF: LAN PRINTER PORT NAME = BRN_600300
[00318427] 040000 INF: PARAM MODEL NAME MFC-5840CN
[00318427] 040000 INF: PARAM CMP PRINTER NAME Brother MFC-5840CN Printe
r
[00318427] 040000 INF: PARAM INTERFACE LAN
[00318427] 040000 INF: PARAM PRINTER ID
[00318427] 040000 INF: PARAM MODE 1
[00318437] 040000 INF: ----- Network Port Check Start ----- *75 Network Port Communication Check
[00318437] 040000 INF: NETWORK PORT CHECK = BRN_600300 *76 Port Name created by installer
[00318437] 040000 INF: INTERFACE = LAN
[00318437] 040000 INF: ----- Nework Connect Check Start ----- *77 No meaning (Ignore)
[00320480] 010000 ERR: BrNetCloseDevice(): WSAWaitForMultipleEvents() timeout Error (code = 0)
[00322482] 010000 ERR: BrNetCloseDevice(): WSAWaitForMultipleEvents() timeout Error (code = 0)
[00322482] 040000 INF: Connect Device Name = Brother MFC-5840CN
[00322482] 040000 INF: ----- Nework Connect Check End -----
[00322482] 040000 INF: PORT CHECK = OK *78 If OK, communication to network port is available.
[00322482] 040000 INF: ----- Network Port Check End -----
[00322482] 040000 INF: ----- Printer Driver Check End -----
[00322482] 040000 INF: ----- Scanner Driver Check Start -----
[00322833] 040000 INF: Initialize() Result = 0 *22 Scanner Driver Installation Check
[00322843] 040000 INF: Scanner Install = OK *23 Scanner Error Code
[00323183] 040000 INF: Initialize() Result = 0 *24 If Scanner Install =OK, scanner driver is properly installed.
[00324045] 040000 INF: ChkStiDevice() Result = 0
[00324045] 040000 INF: ChkWiaDevice() Result = 3
[00326909] 040000 INF: ChkTwainDs() Result = 0
[00326909] 040000 INF: Get ScannerName = Brother MFC-5840CN LAN
[00328501] 040000 INF: GetDefaultTwds() Result = 0
[00328501] 040000 INF: Get DefaultDS = TWAIN_32 Brother MFL Pro Scanner
[00329332] 040000 INF: GetPortName() Result = 0
[00329332] 040000 INF: Get PortName = AUTO
[00332827] 040000 INF: ChkDevCommunication() Result = 0
[00332827] 040000 INF: Scanner Connect = OK
[00332827] 040000 INF: ----- Scanner Driver Check End -----
19
20
21
76
75
77
78
22
23
24
Net Normal
Confidential