Confidential
CHAPTER 5 DISASSEMBLY/REASSEMBLY AND LUBRICATION
This chapter details procedures for disassembling and reassembling the machine together with
related notes. The disassembly order flow provided enables you to see at a glance the quickest
way to get to component(s) involved.
At the start of a disassembly job, you check the disassembly order flow that guides you through
a shortcut to the object components.
This chapter also covers screw tightening torques and lubrication points to which the specified
lubricants should be applied during reassembly jobs.
CONTENTS
5.1 DISASSEMBLY/REASSEMBLY .....................................................................................5-1
Safety Precautions ...........................................................................................................5-1
Tightening Torque ............................................................................................................5-2
Harness Routing...............................................................................................................5-4
Preparation .....................................................................................................................5-21
How to Access the Object Component...........................................................................5-21
Disassembly Flowchart...................................................................................................5-22
5.1.1 AC Cord..............................................................................................................5-23
5.1.2 Drum/Toner ASSY .............................................................................................5-23
5.1.3 DX Feed ASSY (For the models with the DX only)............................................5-24
5.1.4 Paper Tray..........................................................................................................5-24
5.1.5 Back Cover.........................................................................................................5-27
5.1.6 DX Blank Cover (For models with out the DX only) ...........................................5-27
5.1.7 Outer Chute ASSY .............................................................................................5-28
5.1.8 Access Cover/Side Cover L ...............................................................................5-30
5.1.9 ADF Unit.............................................................................................................5-31
5.1.10 Hinge Base R .....................................................................................................5-32
5.1.11 Hinge Arm R.......................................................................................................5-33
5.1.12 Hinge ASSY L ....................................................................................................5-33
5.1.13 ADF Cover ASSY ...............................................................................................5-34
5.1.14 ADF Side Cover F ..............................................................................................5-34
5.1.15 ADF Side Cover R..............................................................................................5-35
5.1.16 ADF Chute ASSY ...............................................................................................5-36
To Next Page
Loading...
