Brother DCP-8065DN

Confidential
9-9
Error Code
(Hex)
Symptom Probable Cause
Solution
Hook of the front cover
sensor on the front cover
b
roken.
Replace the front cover.
A1 Front cover opened.
Front cover sensor
defective
Replace the front cover
sensor.
Document jam Remove the jammed
document.
A2
Document length exceeding
the scan limitation.
During scanning, 90 cm or
longer of a document is
detected.
During document feeding or
ejecting, 400 cm or longer of
a document is detected.
Document rear sensor
actuator does not move
smoothly.
Set the document rear
sensor actuator into place.
Document jam Remove the jammed
document.
Document rear sensor
actuator does not move
smoothly.
Set the document rear
sensor actuator into place.
A3 The document rear sensor
does not come ON during
document pull-in operation.
Document rear sensor
broken
Replace the document rear
sensor.
A4 Not used.
A5 FAX scanning failure.
(1st time)
White-level reference film
stained in the scanner
cover
Replace the scanner cover
(scanner unit).
CCD unit defective Replace the CCD unit.
A6 FAX scanning failure. (retry)
Main PCB defective Replace the main PCB.
A7-A9 Not used.
AA The document cover is
opened when the ADF is
used.
Document cover sensor
defective
Replace the document
cover sensor.
AB Not used.
AC-AE Not used.
Scanner lock lever
defective
Replace the scanner lock
lever.
AF The scanner is locked.
Driver PCB defective Replace the driver PCB.
B0 Not used.
Scan level error Execute the maintenance
mode 55.
CCD unit defective Replace the CCD unit.
B1 Dark level offset data level
error for scanning.
Main PCB defective Replace the main PCB.
Scan level error Execute the maintenance
mode 55.
CCD unit defective Replace the CCD unit.
B2 Gain control data level error
for scanning.
Main PCB defective Replace the main PCB.