Brother MFC-9560CDW - Page 130

2-91
Confidential
■ Error code CE
The waste toner box is not installed.
<User Check>
- Check if the waste toner box is installed into the machine.
- Replace the waste toner box with a new one.
■ Error code CF
Waste toner box full. (The sensor detects that the waste toner is full.)
<User Check>
- Replace the waste toner box with a new one.
No Waste Toner
Install the Waste Toner Box. Refer to the User's Guide for instructions.
Step Cause Remedy
1 Waste toner sensor failure Check the sensor performance following
the procedure described in “Function code
32”. If any problem occurs, replace the
waste toner sensor.
2 High-voltage power supply PCB
failure
Replace the high-voltage power supply
PCB ASSY.
3 Main PCB failure Replace the main PCB ASSY.
(Non Touch panel model)
Replace WT Box
Replace the Waste Toner Box. Refer to the User's Guide for instructions.
(Touch panel model)
Animation is displayed.
Step Cause Remedy
1 Harness connection failure of
waste toner sensor
Check the harness connection of the
waste toner sensor and reconnect it.
2 Waste toner sensor failure Check the sensor performance following
the procedure described in “Function code
32”. If any problem occurs, replace the
waste toner sensor.
3 High-voltage power supply PCB
failure
Replace the high-voltage power supply
PCB ASSY.
4 Main PCB failure Replace the main PCB ASSY.