Brother MFC-9560CDW - EEPROM Customizing (User-Accessible) (Function Code 52)

5-35
Confidential
1.4.14 EEPROM customizing (User-accessible) (Function code 52)
<Function>
This function allows users to customize the EEPROM settings such as language, function
settings or worker switch settings.
<Operating procedure>
Non Touch panel model
(1) Press the Menu, Start/Black and Menu buttons in this order in the ready state.
The "0" will appear on the LCD.
(2) Press the 5 and 2 buttons in this order. The "Set Country/Press OK" will appear on the
LCD.
(3) Press the OK button. The country name will appear on the LCD.
Touch panel model
(1) Press the 5 and 2 buttons in this order in the initial state of the maintenance mode.
"Set Country" will appear on the LCD, and the corresponding country names shown in the
table below will appear under "Set Country".
(2) Press the country name of the user. The setting is saved, and the machine returns to the
ready state.
(3) Press the or button to display the country name where the machine is used. Press
the OK button while the country name is being indicated. The EEPROM is customized,
and the machine returns to the ready state.
Note:
This function is applicable to France and surrounding countries, Pan-Nordic, East
Europe, Oceania and Iberia areas only.
Note:
The country name indicated on the LCD varies depending on the area (code input in
Function code 74) as shown in the table below.
France and
surrounding
countries
Oceania Pan-Nordic Iberia East Europe
France Australia Norge España österreich
België /
Belgique
New Zealand Suerige Portugal Ceska
republika
Nederland Suomi Magyarorazág
Danmark Polska
Others
Rom
ânia
Slovensko
Others