Brother MFC-9560CDW - Registration Mark Sensor Holder Assy;Shutter Solenoid

3-188
Confidential
9.71 Registration Mark Sensor Holder ASSY/
Shutter Solenoid
(1) Disconnect the Connector (CN8) from the High-voltage power supply PCB ASSY.
Fig. 3-280
(2) Remove the Core from the Harness of the Registration mark R PCB and Belt temperature
sensor.
Fig. 3-281
CN8
Shutter solenoid
Connector
High-voltage power supply PCB ASSY
<Right side>
Core
Registration mark R PCB
Belt temperature sensor
High-voltage power supply PCB ASSY
<Left side>