Brother MFC-9560CDW - Communications Error Code

2-29
Confidential
3.3 Communications Error Code
*1
Available in German models only.
Code 1 Code 2 Cause
Refer to:
10 08 Wrong number called. 2-138
11 01 No dial tone detected before start of dialing. 2-138
11 02 Busy tone detected before dialing. 2-138
11 03 2nd dial tone not detected. 2-138
11 05 No loop current detected.
*1
2-138
11 06 Busy tone detected after dialing or called. 2-138
11 07 No response from the remote station in sending. 2-138
11 10 Unobtainable tone detected after dialing. 2-138
17 07 No response from the calling station in receiving. 2-138
20 01 Unable to detect a flag field. 2-138
20 02 Carrier was OFF for 200 ms or longer. 2-138
20 03 Abort detected (“1” in succession for 7 bits or more). 2-138
20 04 Overrun detected. 2-138
20 05 A frame for 3 seconds or more received. 2-138
20 06 CRC error in answerback. 2-138
20 07 Echo command received. 2-138
20 08 Invalid command received. 2-138
20 09 Command ignored once for document setting or for
dumping-out at turn-around transmission.
2-138
20 0A T5 time-out error 2-138
20 0B CRP received. 2-138
20 0C EOR and NULL received. 2-138
32 01 Remote terminal only with V.29 capability in 2,400 or 4,800
bps transmission.
2-138
32 02 Remote terminal not ready for polling. 2-138
32 10 Remote terminal not equipped with password function or its
password switch OFF.
2-138
32 11 Remote terminal not equipped with or not ready for
confidential mailbox function.
2-138
32 12 Remote terminal not equipped with or not ready for relay
broadcasting function.
2-138
32 13 No confidential mail in the remote terminal. 2-138