2-30
Confidential
Code 1 Code 2 Cause
Refer to:
32 14 The available memory space of the remote terminal is less
than that required for reception of the confidential or relay
broad-casting instruction.
2-138
32 18 Remote terminal not equipped with color function. 2-138
40 02 Illegal coding system requested. 2-138
40 03 Illegal recording width requested. 2-138
40 05 ECM requested although not allowed. 2-138
40 06 Polled while not ready. 2-138
40 07 No document to send when polled. 2-138
40 10 Nation code or manufacturer code not correct. 2-138
40 13 Polled by any other manufacturers' terminal while waiting for
secure polling.
2-138
40 17 Invalid resolution selected. 2-138
40 20 Invalid full color mode selected. 2-138
50 01 Vertical resolution capability changed after compensation of
background color.
2-138
63 01 Password plus “lower 4 digits of telephone number” not
coincident.
2-138
63 02 Password not correct. 2-138
63 03 Polling ID not correct. 2-138
74 DCN received. 2-138
80 01 Fallback impossible. 2-138
90 01 Unable to detect video signals and commands within 6
seconds after CFR is transmitted.
2-138
90 02 Received PPS containing invalid page count or block count. 2-138
A0 03 Error correction sequence not terminated even at the final
transmission speed for fallback.
2-138
A0 11 Receive buffer empty. (5-second time-out) 2-138
A0 12 Receive buffer full during operation except receiving into
memory.
2-138
A0 13 Decoding error continued on 500 lines or more. 2-138
A0 14 Decoding error continued for 15 seconds or more. 2-138
A0 15 Time-out: 13 seconds or more for one-line transmission. 2-138
A0 16 RTC not found or carrier OFF detected for 6 seconds. 2-138
A0 17 RTC found but no command detected for 60 seconds or
more.
2-138
A0 19 No video data to be sent. 2-138
To Next Page
Loading...
