Brother MFC-9560CDW - T1 Paper Edge Sensor PCB ASSY;T1 Paper Edge Actuator;T1 Paper Edge Actuator Spring

3-204
Confidential
9.76 T1 Paper Edge Sensor PCB ASSY/
T1 Paper Edge Actuator/
T1 Paper Edge Actuator Spring
(1) Remove the three Taptite bind B M3x10 screws from the MP drive frame.
(2) Remove “A” of the Registration roller ground wire.
(3) Remove the MP drive frame from the PF ASSY.
Fig. 3-309
(4) Release the Hook to remove the Separation R shaft bush from the T1 drive shaft gear
Z17M07.
Fig. 3-310
Pin
MP drive frame
Registration roller ground wire
“A”
PF ASSY
Taptite bind B M3x10
Taptite bind B M3x10
Hook
T1 drive shaft gear Z17M07
Separation R shaft bush
PF ASSY