Brother MFC-9560CDW - Operational Check of Control Panel Button (Function Code 13)

5-19
Confidential
1.4.8 Operational check of control panel button (Function code 13)
<Function>
This function allows you to check if the buttons on the control panel work properly.
<Operating procedure>
(1) Press the 1 and 3 buttons in this order in the initial state of the maintenance mode.
The "00" will appear on the LCD.
(2) Press the buttons in the order designated in the illustration shown below. The LCD shows
the corresponding number in decimal notation each time a button is pressed. Check that
the displayed number is correct by referring to the illustration below.
When the buttons are pressed in an incorrect order, a warning beep goes off and
"INVALID OPERATE" appears on the LCD at the same time. Press the Stop/Exit button,
and the press the correct buttons.
(3) After the last number button is pressed, the machine beeps for one second and returns to
the initial state of the maintenance mode.
■ MFC-9460CDN/9465CDN/9560CDW
Fig. 5-9
■ DCP-9055CDN
Fig. 5-10
Memo: Memo
When the Stop/Exit button is pressed, the machine beeps for one second and returns to the
initial state of the maintenance mode.
10
1 2
3 4
5 6
7 8
9
11 12
13 14 15 19
20 21 22
2423
27
25
26
28 29
30 31 32
33 34 35
36 37 38
39 40 41
42
43
44
16 17 18
28
27
26
14 15 16
17 18 19
20 21 22
23
12 13
7 8
10
9
11
6
1 2 5
3 4
24 25