Brother MFC-9560CDW - Paper Eject ASSY

3-173
Confidential
9.62 Paper Eject ASSY
(1) Disconnect the wiring of the harness from the High-voltage power supply PCB ASSY.
(2) Remove the five Taptite cup S M3x6 SR screws to remove the Paper eject ASSY from the
Base frame unit.
Fig. 3-257
Harness routing: Refer to “ Paper Eject ASSY”
Taptite cup S M3x6 SR
Base frame unit
Paper eject ASSY
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
<Back side>