Brother MFC-9560CDW - Detailed Description of Maintenance-Mode Functions; EEPROM Parameter Initialization (Function Code 01, 91)

5-4
Confidential
1.4 Detailed Description of Maintenance-mode Functions
1.4.1 EEPROM parameter initialization (Function code 01, 91)
<Function>
This function initializes the setting values of the operation parameters, user switches, and
worker switches (WSW) registered in the EEPROM.
Entering function code 01 initializes almost all of the EEPROM areas, but entering 91 does not
initialize some areas, as listed below.
<Operating procedure>
(1) Press the 0 and 1 buttons (or the 9 and 1 buttons according to your need) in this order in
the initial state of the maintenance mode. The "PARAMETER INIT" appears on the LCD.
(2) Upon completion of parameter initialization, the machine returns to the initial state of the
maintenance mode.
Data item Function code 01 Function code 91
Counter information These will not be
initialized.
These will not be
initialized.
Error History
MAC Address (Ethernet Address)
Operation lock of the control panel
password
These will be
initialized.
Secure Function Lock
Telephone function registration
One-touch dialing
Speed dialing
Group dialing
User switches (Items to be initialized
when resetting to the factory default
settings)
These will be
initialized.
Worker switch
Function settings except user switches
(Items except the factory default settings)
- Languages
- Reprint
- Secure Print
- Interfaces
LAN area (Network settings)
PCL core area
(Emulation settings)
Note:
Function code 01 is for service personnel. Function code 91 is for user support.