Brother MFC-9560CDW - Sensitivity Adjustment of Density Sensor (Maintenance Mode: Code 72); Performing the Developing Bias Voltage Correction (Maintenance Mode: Code 83); Performing the Adjustment of Inter-Color Position Alignment (Maintenance Mode: Code 66); Acquisition of White Level Data (Maintenance Mode: Code 55)

4-7
Confidential
1.5 Sensitivity Adjustment of Density Sensor
(Maintenance Mode: Code 72)
Make sensitivity adjustments of the density sensor in accordance with "1.4.25 Sensitivity
adjustment of density sensor" in Chapter 5.
1.6 Performing the Developing Bias Voltage Correction
(Maintenance Mode: Code 83)
Perform developing bias voltage correction in accordance with "1.4.31 Developing bias
voltage correction" in Chapter 5.
1.7 Performing the Adjustment of Inter-color Position
Alignment (Maintenance Mode: Code 66)
Perform adjustment of inter-color position alignment in accordance with "1.4.19 Adjustment of
inter-color position alignment” in Chapter 5.
1.8 Acquisition of White Level Data
(Maintenance Mode: Code 55)
Acquire the white level data in accordance with “1.4.17 Acquisition of white level data” in
Chapter 5.
1.9 Adjustment of Touch Panel
(Maintenance Mode: Code 61) (Touch Panel Model Only)
Check performance of the LCD in accordance with "1.4.18 Adjustment of touch panel" in
Chapter 5.
1.10 Operation Check of Sensors
(Maintenance Mode: Code 32)
Check performance of the sensors in accordance with "1.4.10 Operational check of sensors"
in Chapter 5.