Brother MFC-9560CDW - If You Replace the Adf Unit; If You Replace the Second Side Scanning Cis (Duplex Scanning Model); Acquisition of White Level Data (Maintenance Mode: Code 55); Scanning and Printing Check

4-17
Confidential
11. IF YOU REPLACE THE SECOND SIDE
SCANNING CIS
(DUPLEX SCANNING MODEL)
<What to do when replacing the second side scanning CIS>
- Acquisition of white level data (Maintenance mode: code 55)
- Scanning and printing check
- Placement of document scanner unit in position for transportation (Maintenance mode: code 06)
11.1 Acquisition of White Level Data
(Maintenance Mode: Code 55)
Perform the acquisition of white level data and scanner area setting in accordance with "1.4.17
Acquisition of white level data" in Chapter 5.
11.2 Scanning and Printing Check
Scan the test chart TC-023 with ADF, and make sure there are no problem of the printed
image.
Make sure there are no problem of the ADF, document scanner unit and the performance of
recording part.
11.3 Placement of Document Scanner Unit in Position for
Transportation (Maintenance Mode: Code 06)
Perform the placement of document scanner unit in the position for transportation in
accordance with "1.4.3 Placement of document scanner unit in position for transportation" in
Chapter 5.
12. IF YOU REPLACE THE ADF UNIT
<What to do when replacing the ADF unit>
- Acquisition of white level data (Maintenance mode: code 55)
- Scanning and printing check
12.1 Acquisition of White Level Data
(Maintenance Mode: Code 55)
Perform the acquisition of white level data and scanner area setting in accordance with "1.4.17
Acquisition of white level data" in Chapter 5.
12.2 Scanning and Printing Check
Scan the test chart TC-023 with ADF, and make sure there are no problem of the printed
image.
Make sure there are no problem of the ADF, document scanner unit and the performance of
recording part.