Brother MFC-9560CDW - T2 Relay PCB ASSY

3-221
Confidential
10.6 T2 Relay PCB ASSY
(1) Disconnect the all Connectors from the T2 relay PCB ASSY.
Fig. 3-339
(2) Remove the Taptite cup S M3x6 SR screw to remove the T2 relay PCB ASSY from the
T2 frame L unit.
Fig. 3-340
T2 relay PCB ASSY
(Not used)
(T2 paper edge sensor)
(T2 plate-up detection sensor)
(T2 connector)
(T2 plate-up motor)
(T2 solenoid)
T2 relay PCB ASSY
Taptite cup S M3x6 SR
2a
2b
T2 frame L unit