5-67
Confidential
1.4.34 Exit from the maintenance mode (Function code 99)
<Function>
This function allows you to exit from the maintenance mode. If the error related to the fuser
unit occurs, the error is cleared. (Refer to "2.4 How to Recover from Errors of the Fuser Unit"
in this chapter.)
<Operating procedure>
(1) Press the 9 button twice in the initial state of the maintenance mode. The maintenance
mode exits from the maintenance mode and return to the ready state.
Note:
When a fuser error occurs, be sure to turn ON the power after cooling the halogen
heater sufficiently.
To Next Page
Loading...
