Brother MFC-9560CDW - Page 188

3-5
Confidential
Joint cover base ASSY Taptite cup S M3x8 7 0.70±0.10 (7±1)
Taptite bind B M4x12 2 0.80±0.10 (8±1)
Main PCB ASSY Taptite cup S M3x6 SR 4 0.70±0.10 (7±1)
Engine PCB ASSY Taptite cup S M3x6 SR 3 0.70±0.10 (7±1)
Main shield plate Taptite cup S M3x6 SR 3 0.70±0.10 (7±1)
Top beam Taptite cup S M3x6 SR 2 0.70±0.10 (7±1)
Scanner holder Taptite cup S M3x6 SR 5 0.70±0.10 (7±1)
Develop release motor Taptite bind S M3x6 SR 2 0.70±0.10 (7±1)
Panel cable rack Taptite cup S M3x6 SR 1 0.70±0.10 (7±1)
Grand plate Taptite cup S M3x6 SR 1 0.70±0.10 (7±1)
Taptite pan (washer) B
M4x12DA
1 0.50±0.05 (5±0.5)
Top drive ASSY Taptite cup S M3x6 SR 9 0.70±0.10 (7±1)
Taptite bind B M4x12 1 0.80±0.10 (8±1)
Drum drive motor Screw bind M3x4 3 0.50±0.05 (5±0.5)
Registration solenoid ASSY Taptite cup S M3x6 SR 1 0.70±0.10 (7±1)
Top drive cover Taptite cup S M3x6 SR 3 0.70±0.10 (7±1)
Mono solenoid ASSY Taptite cup S M3x6 SR 1 0.70±0.10 (7±1)
Fuser develop motor ASSY Taptite cup S M3x6 SR 4 0.70±0.10 (7±1)
PF plate ASSY Taptite bind B M4x12 3 0.60±0.10 (6±1)
Taptite cup S M3x6 SR 1 0.80±0.10 (8±1)
PF cleaner drive ASSY Taptite bind B M4x12 2 0.60±0.10 (6±1)
T1 solenoid ASSY Taptite bind B M3x8 1 0.35±0.05 (3.5±0.5)
Paper eject ASSY Taptite cup S M3x6 SR 5 0.70±0.10 (7±1)
Eject duct Taptite bind B M4x12 1 0.80±0.10 (8±1)
Paper eject motor Taptite bind S M3x6 2 0.70±0.10 (7±1)
AC inlet Taptite flat B M3x10 1 0.50±0.10 (5±1)
Low-voltage power supply unit Screw pan (S/P washer) M4x8 2 0.90±0.10 (9±1)
Taptite cup S M3x8 2 0.70±0.10 (7±1)
Taptite cup B M3x12 2 0.40±0.05 (4±0.5)
Taptite pan (washer) B
M4x12DA
4 0.90±0.10 (9±1)
Screw pan (S/P washer) M4x8 1 0.90±0.10 (9±1)
Low-voltage power supply PCB
ASSY
Screwe cup M3x6 4 0.35±0.05 (3.5±0.5)
Registration mark sensor holder
ASSY
Taptite bind B M3x10 2 0.40±0.05 (4±0.5)
Shutter solenoid Taptite bind B M3x10 1 0.55±0.05 (5.5±0.5)
MP upper cover ASSY Taptite bind B M3x8 2 0.40±0.10 (4±1)
MP paper empty/registration
front sensor PCB ASSY
Taptite bind B M3x8 1 0.40±0.10 (4±1)
PF ASSY Taptite bind B M4x12 2 0.80±0.10 (8±1)
Shoulder screw 1 0.70±0.10 (7±1)
Location of screw Screw type Q' ty
Tightening torque
N•m(kgf•cm)