3-97
Confidential
(3) Pass the Second side scanning CIS flat cable through the ADF unit.
Fig. 3-121
(4) Affix double-sided adhesive tape to the FFC holder ASSY as shown in the figure below.
(If the double-sided adhesive tape has already been affixed, be sure to remove it, and
then affix new double-sided adhesive tape.)
Fig. 3-122
Lower chute ASSY
Second side scanning CIS
Upper document chute ASSY
flat cable
FFC holder ASSY
Double-sided adhesive tape
To Next Page
Loading...
