Brother MFC-9560CDW - Page 305

3-122
Confidential
Fig. 3-168
■ Legal model
(1) Remove the Rubber key L from the Panel cover.
Fig. 3-169
Assembling Note:
- Upon assembling, assemble the Printed rubber key L and Printed rubber key R first, and
then assemble the Printed rubber key C.
- Check if it is firmly inserted into the Positioning pin.
Printed rubber key C
Printed rubber key R
Printed
rubber key L
Panel cover
Positioning pin
Positioning pin
Positioning pin
Positioning pin
Positioning pin
Positioning pin
Positioning
pin
Pin
Pin
Panel cover
Rubber key L