Brother MFC-9560CDW - Page 318

3-135
Confidential
(5) Remove the Screw pan (S/P washer) M3.5x6 screw to remove the NCU shield cover from
the NCU unit.
Fig. 3-192
(6) Remove the two Taptite cup S M3x6 SR screws to remove the NCU PCB ASSY from the
NCU shield plate.
Fig. 3-193
Screw pan (S/P washer) M3.5x6
NCU shield cover
NCU unit
NCU shield plate
NCU PCB ASSY
Taptite cup S M3x6 SR