Brother MFC-9560CDW - Page 339

3-156
Confidential
(9) Remove the nine Taptite cup S M3x6 SR screws and Taptite bind B M4x12 screw from the
Top drive ASSY.
Fig. 3-230
Note:
- When removing and installing the Top drive ASSY, be sure to hang the FG wire under
bar rear on the Hook of the Base frame unit as shown in the figure before removing
and installing the Top drive ASSY.
- Be sure to install the FG wire under bar rear in the Top drive ASSY when installing
the Top drive ASSY.
Taptite bind B
Taptite cup S
Base frame unit
M3x6 SR
M4x12
Hook
Base frame unit
FG wire under bar rear
FG wire under
bar rear
Top drive ASSY