5-16
Confidential
[2] Printout of worker switch data (Function code 11)
<Function>
The machine prints out the setting items of the worker switches and their contents specified.
<Operating procedure>
(1) Press the 1 button twice in the initial state of the maintenance mode.
The "PRINTING" will appear on the LCD.
(2) Printing of CONFIGURATION LIST (see the figure below) starts, and when printing is
finished, the machine beeps for one second and returns to the initial state of the
maintenance mode.
Fig. 5-6
Note:
The function names specific to machines are printed in CONFIGURATION LIST for conve-
nience of program development. They are invalid in this product and should be ignored.
To Next Page
Loading...
