Option Description
Monochrome
Convert your photo to monochrome.
Sepia
Convert the colour of your photo to sepia.
Auto Correct & Remove Red-Eye
The machine decides the appropriate effects for your photo and attempts to remove red-eye.
• There are some cases when red-eye may not be removed.
- When the face is too small in the image.
- When the face is turning too far up, down, left, or right.
• Press [Cancel] to return to the list of effects.
• If your photo is very small or has irregular proportions, the Touchscreen displays [Image Too Small]
or [Image Too Long]. You may not be able to crop or enhance the photo.
7. Enter the number of copies in one of the following ways:
• Press [-] or [+] on the Touchscreen.
• Press to display the keyboard on the Touchscreen, and then enter the number of copies using the
Touchscreen keyboard. Press [OK].
8. Press [OK].
9. To change the print settings, press [Print Settings].
10. Press [Start].
Related Information
• Print Photos from Media Using the Photo Button on the Brother Machine
• Print Settings for Photos
326
To Next Page
Loading...
