Maintenance
Introduction, maintenance
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 6 – 1
6 – Maintenance
6.1 Introduction, maintenance
To maintain a high level of truck safety, and to minimise downtimes, all
the points specified in the service program should be carried out.
The intervals specified are those meeting the truck manufacturer's
requirements for a truck – RRE160/180/200/250 – in standard applica
-
tion at approximately 1000 operating hours/year. The local operating
environment may require service intervals that differ from those speci
-
fied.
Once a truck's service interval has been determined, the hour meter is
used in the first instance to determine when servicing is to be carried
out.
To maintain truck safety, only spare parts approved by the manufactur-
er may be used for servicing and repairs.
During the truck warranty period: If repairs or servicing have been
carried out by non-authorised personnel, or if non-approved spare parts
are used, the truck warranty ceases to be valid.
IMPORTANT:
At each service, checks must be made that the truck functions as
usual and is safe. These checks are to be performed in accordance
with the instructions for daily care that are in the operator's manual.
To Next Page
Loading...
