Brake and wheel 3000
Travel brake system (3100)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 11 – 1
11 – Brake and wheel 3000
11.1 Travel brake system (3100)
11.1.1 Removing the support arm's multiple
disc brake
See the section "Removing the support arm wheel from the truck".
11.1.2 Dismantling the multiple disc brake
1. Lift the brake from the support arm wheel.
2. Place the brake on a clean, dry work bench with the end plate (d)
uppermost.
IMPORTANT!
Take care that the components and cable harness are not damaged
during this and subsequent operations.
3. Undo and remove the six M6x40 allen screws (e) and their wash-
ers.
4. Remove the aluminium end plate (d).
IMPORTANT!
Make a note of the number of shims (f) on each spacer (g).
5. Lift off the pressure plate (c) and the disc unit which consists of 4
outer discs (a) and three inner discs (b).
6. Remove the brass plate (h).
b
c
d
f
g
a
h
To Next Page
Loading...
