General introduction
How to use the manual
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 2 – 1
2 – General introduction
2.1 How to use the manual
The service manual is divided into chapters containing the following
information:
• Functions and parameters – This chapter contains a basic descrip-
tion of the main functions of the truck and the control system para-
meters.
• Installation and initial operation – This chapter describes the work
that needs to be done before the truck is used for the first time.
• Maintenance – This chapter contains a general periodic mainte-
nance schedule and a detailed description of the maintenance to be
carried out.
• Troubleshooting – This chapter describes the error codes that ap-
pear in the display when the truck completely or partly stops work-
ing. The chapter also describes the reason why the errors occur and
suggested remedies.
• Step by step – This chapter describes the various parts of the truck,
for example the hydraulic system, including what the parts look like
and the service activities that need to be carried out. The various de
-
scriptions are organised according to BT's C-code system.
• Appendixes – The appendixes contain:
- instructions for disposal
- information about electrical components and wiring diagrams
- hydraulics diagrams
- list of required tools
- information about general tightening torques
- oil and grease specifications
- Technical data.
To Next Page
Loading...
