BT RRE200 - Marking According to Our Standard; Marking Examples

18 – 2 Repair Manual RRE140/160/180/200/250 © BT
Appendix “Destruction instructions”
Marking of plastics
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
18.2.2 Marking according to our standard
Standards: 58-02-001, 58-02-003 and 58-02-004.
Only a few examples of markings are presented here. Fore more infor-
mation, please refer to the standards mentioned above.
The product material and trade name are indicated between arrows.
Example: >PP<.
Abbreviations
- ABS: acrylonitrile/butadiene/styrene
- HDPE: High Density Polyethylene
- LDPE: Low Density Polyethylene
- PA: Polyamide
- PA6: Amide resin 6
- PA66: Amide resin 66
- PBT: Polybutylene terephtalate
- PC: Polycarbonate
- PET: Polyethylene terephtalate
-PMMA: Plexiglas
- POM: Polyoxymethylene, Polyformaldehyde
- PP: Polypropylene
- PUR: Polyurethane
Marking examples
Products made from a single substance
ABS (acrylonitrile/butadiene/polystyrene):
>ABS<
Polyurethane:
>PUR<
Plastic compounds
A compound based on acrylonitrile/butadiene/polystyrene and carbon-
ate plastic:
>ABS+PC<
Filled or reinforced materials
Polypropylene with 30% mineral powder:
>PP-MD30<