BT RRE200 - Load Information Display - LID (Option); LID LED Symbols

Functions and parameters
Operator compartment
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 4 – 27
4.6.5 Load Information Display – LID (option)
The Load Information Display, referred to from now on as “LID”, is avail-
able as an option and is fitted in the truck's roof panel.
If a LID is installed, it is activated on the basis of parameter settings.
The display contains six coloured icons and a monochrome graphics
display.
In logged-out mode, the display is switched off.
LID LED symbols
The coloured icons come on in the event of the following:
a. Height preselector active (green).
b. Not used.
c. Sideshift in initial position (green).
4. Tilt in initial position (green).
e. Aux (yellow).
f. Not used.
When the truck is operated in emergency driving mode, all the symbols
flash simultaneously.
AUX
a
b
c
d
e
f